Translating the LED Light Displays

During first boot-up / Unboxing: 

Unboxing your Cooksy 

1. Blue LED turns on when power is applied

2. Blue LED turns off when the Cooksy has booted the Operating System

3. Sweeping blue LED to indicate Wi-Fi setup is required from the app

 4. Blinking yellow indicates the Wi-Fi SSID and password have been received in the Cooksy from the app

5. Solid green LED indicates connection to Wi-Fi successful

6. Pulsing green indicates an automatic update has started on the Cooksy

During powering on after already paired / set up on Wi-Fi

1. Blue LED turns on when power is applied

2. Blue LED turns off when the Cooksy has booted the Operating System

3. Green bouncing LED turns on while connecting to Wi-Fi

4. Solid green LED indicates Cooksy is connected to Wi-Fi and ready for use. If you run into an issue - Connecting a Solid Green Cooksy

Note - Continuous bouncing green indicates the Cooksy can't connect to Wi-Fi. This can be due to being Out of range or being moved to new Wi-Fi network. Setting up on a new network will require a reset - Resetting Cooksy

Other Color Indicators:
  Bouncing red LED indicates power issue. - Cooksy needs to be connected to power with the included cable and QC 3.0 Power Brick. 

  Blinking yellow followed by blinking red (for two seconds only) indicates failure to connect to Wi-Fi  Check Wi-Fi SSID and password.